![Recaro Profi SPG XL Bucket Seat (FIA) - BLK Velour](http://www.infinitesimulations.com/cdn/shop/files/AdvancedSimRacing-RecaroProfiXLBLK_1000x_jpg_1000x1000.webp?v=1703436108)
Recaro Profi SPG XL Bucket Seat (FIA) - BLK Velour
by Recaro
Sold out
$1,699.99
Unparalleled Hold
The RECARO Profi SPG XL Bucket Seat (FIA) - BLK Velour is crafted for supreme performance in offroad and rally environments. The proven shells, made from glass fiber-reinforced polymer (GFRP), deliver outstanding lateral support on both race tracks and offroad terrains. The XL variant, featuring larger belt slots, is wider and higher, ensuring a premium fit.
Specifications
- Suitable for 4-, 5-, or 6-point belts
- Flame-retardant upholstery
- Friction grip surface around the shoulders
- Paddable lumbar support
- Seat shell made of glass fiber-reinforced plastic (GFRP)
- XL variant: larger belt slots, seat shell 35mm wider and 50mm higher
-
Dimensions:
- Refer to the last image for detailed measurements.
- Overall Dimensions:
- A: Seat depth
- B: Seat height
- C: Shell outer measurement at shoulder
- D: Shell outer measurement at seat bottom
- E: Subframe width
- F: Tilt at mounting level
- G: Width between mounting bolts
- Comfort Dimensions:
- H: Seat width at the bottom
- I: Height of shoulder support
- J: Seat depth
- K: Seat height
- Belt Slot:
- L: Height of belt slot
- M: Center belt slot
- XL: seat shell 35mm wider and 50mm higher
- Weight without brackets: 10kg
What's Included?
- Recaro Profi SPG XL Bucket Seat (FIA) - BLK Velour
- Recaro Steel Side Brackets
Installation Guide (Without Seat Sliders)
- Install the 22’ profiles on the chassis, tightening corner gusset bolts but leaving chassis bolts loose.
- Attach seat brackets to the 22’ profile, ensuring the inside edge aligns with the 22’ profile, then tighten bolts.
- Install the seat in the brackets, taking care not to scratch it. Adjust 22’ profiles if needed.
- Tighten seat brackets to the seat in the desired position, using the same mounting holes on each side.
- Ensure equal space between 22’ profiles and base on each side to center the seat with the chassis.
- Your rig is ready to go!
With Seat Sliders
- Install the 22’ profiles on the chassis, tightening corner gusset bolts but leaving chassis bolts loose.
- Attach seat sliders to the seat brackets, ensuring the inside edge aligns with the seat bracket.
- Install the seat slider and seat bracket assembly on the seat off the chassis. Be cautious not to scratch the seat.
- Ensure both seat sliders are at the same locking position.
- Adjust the U handle bar for seat sliders based on fitment.
- Install the U handle bar, being careful not to injure fingers.
- Install the seat assembly on the 22’ profiles.
- Tighten front or rear bolts holding the sliders on the 22’ profile.
- Slide seat forwards or backward to access other bolts. Tighten them.
- Center the seat with the chassis by adjusting the 22’ profile and seat assembly.
- Tighten the initially loosened corner gusset bolts.
- Your rig is ready to go!
Shipping and Lead Time
- FREE SHIPPING to Continental U.S.
- IMPORT DUTIES COVERED for U.S.-based customers.
- Shipped from Montreal, Canada.
- Lead time: 5 to 7 business days before shipping. Transit time: 2 to 4 business days.
- Note: Large items may arrive separately due to their weight and size, sorted differently at our shipping partner's logistics hub.
Return Policy If the ordered seat is too tight, a full refund is possible, but return shipping to Montreal, Canada, must be covered. Close attention to specifications and measurements before ordering is advised.