About Us Contact Us Shipping Easy Returns Privacy Terms Of Service
Skip to content
Recaro Pole Position N.G. Bucket Seat (FIA) - Jersey Red with Suede

Recaro Pole Position N.G. Bucket Seat (FIA) - Jersey Red with Suede

by Recaro
Sold out
$1,999.99

Notify me when back in stock

For Seamless Victories from Start to Finish

Embark on victories from start to finish with the RECARO Pole Position N.G. (FIA) racing seat. Whether you're a beginner or a seasoned professional, this seat positions you at the forefront, competing for podium places with unparalleled precision. Its extensive features and customisable cushions and seat covers make it a top choice in GT, touring cars, and club motorsport.

Specifications

  • Seat shell crafted from glass fiber reinforced plastic (GFRP)
  • Compatible with 4-, 5-, or 6-point belts
  • Flame-retardant upholstery
  • Replaceable seat and backrest cushions
  • Paddable lumbar support

Dimensions

  • Refer to the last image for detailed measurements.
  • Overall Dimensions:
    • A: Seat depth
    • B: Seat height
    • C: Shell outer measurement at shoulder
    • D: Shell outer measurement at seat bottom
    • E: Subframe width
    • F: Tilt at mounting level
    • G: Width between mounting bolts
  • Comfort Dimensions:
    • H: Seat width at the bottom
    • I: Height of shoulder support
    • J: Seat depth
    • K: Seat height
  • Belt Slot:
    • L: Height of belt slot
    • M: Center belt slot
  • Weight without brackets: 7.7kg

What's Included

  • Recaro Pole Position N.G. (FIA) Jersey Red with Suede
  • Recaro Steel Side Brackets

Installation Guide (Without Seat Sliders)

  1. Install the 22’ profiles on the chassis, tightening corner gusset bolts but leaving chassis bolts loose.
  2. Attach seat brackets to the 22’ profile, ensuring the inside edge aligns with the 22’ profile, then tighten bolts.
  3. Install the seat in the brackets, taking care not to scratch it. Adjust 22’ profiles if needed.
  4. Tighten seat brackets to the seat in the desired position, using the same mounting holes on each side.
  5. Ensure equal space between 22’ profiles and base on each side to center the seat with the chassis.
  6. Your rig is ready to go!

With Seat Sliders

  1. Install the 22’ profiles on the chassis, tightening corner gusset bolts but leaving chassis bolts loose.
  2. Attach seat sliders to the seat brackets, ensuring the inside edge aligns with the seat bracket.
  3. Install the seat slider and seat bracket assembly on the seat off the chassis. Be cautious not to scratch the seat.
  4. Ensure both seat sliders are at the same locking position.
  5. Adjust the U handle bar for seat sliders based on fitment.
  6. Install the U handle bar, being careful not to injure fingers.
  7. Install the seat assembly on the 22’ profiles.
  8. Tighten front or rear bolts holding the sliders on the 22’ profile.
  9. Slide seat forwards or backward to access other bolts. Tighten them.
  10. Center the seat with the chassis by adjusting the 22’ profile and seat assembly.
  11. Tighten the initially loosened corner gusset bolts.
  12. Your rig is ready to go!

Shipping and Lead Time

  • FREE SHIPPING to Continental U.S. 
  • IMPORT DUTIES COVERED for U.S.-based customers.
  • Shipped from Montreal, Canada.
  • Lead time: 5 to 7 business days before shipping. Transit time: 2 to 4 business days.
  • Note: Large items may arrive separately due to their weight and size, sorted differently at our shipping partner's logistics hub.

Return Policy

 If the ordered seat is too tight, a full refund is possible, but return shipping to Montreal, Canada, must be covered. Close attention to specifications and measurements before ordering is advised.